Vertigraph, Take Off & Estimating Software
ProductsPricingSupportBlogReviews
Free trialStart free trial
  1. Support/
  2. Training/
  3. SiteWorx/OS/
  4. Troubleshooting & Tips/
  5. Toolbars
SiteWorx/OS · Modules413
01Introduction & Setup18 topics
02Getting Started32 topics
03Menus & Toolbars205 topics
04Tabs & Workspaces95 topics
05Troubleshooting & Tips63 topics
  1. Boring Log Overview
  2. How are the volumes calculated and displayed?
  3. Editing Takeoff Objects
  4. Taking off closely spaced contour lines.
  5. Tips and Techniques
  6. Toolbars
  7. Troubleshooting
  8. Getting Started
  9. Review the drawing
  10. Menu Toolbar
  11. How often should I save the File?
  12. Set the Scale
  13. Other Items to Note at the Takeoff Window
  14. About this Users' Guide
  15. I am having problems with the reports, why?
  16. Boring Log Setup
  17. Strata Data Entry
  18. Set Surface Elevation to 0
  19. Use for Fill
  20. Default Expansion Factor
  21. Topsoil
  22. Style
  23. Boring Log Properties
  24. Boring Log Entry Dialog
  25. Boring ID
  26. Surface Elevation
  27. Cut by Soil Type Report
  28. Setup Tab
  29. Soil Type Tab
  30. Alignment Information
  31. Boring Log Tab
  32. Soil Type Lookup Dialog
  33. Soil Layers Tab
  34. Soil Type Entry
  35. Cancel and Save Buttons
  36. Tables
  37. Negative Backfill
  38. Moving Around the Drawing
  39. How to take off a slab on or below grade
  40. Raster drawing cache
  41. Multithreading
  42. Help Button/Pointer
  43. Layer Selection
  44. How can I tell if my dwg file uses GPS coordinates?
  45. Edit Popup Menu
  46. Delete Point
  47. Change to Arc
  48. Undo
  49. Cancel Edit
  50. Finish Edit
  51. Move Point
  52. Insert Point
  53. Antialiasing
  54. Change Elevation
  55. Calculation Error Messages
  56. Open
  57. Main Window
  58. Takeoff Objects
  59. Overcut
  60. Color or Line Color
  61. Line Width
  62. Point Style
  63. Notes
Module 05Troubleshooting & Tips

Toolbars

Toolbars provide the means to control the program and perform tasks in SiteWorx/OS. The Calculation tab toolbar is shown above. If the SiteWorx/OS window is too narrow to display all the toolbars, Sit

Calculation Toolbar

Toolbars provide the means to control the program and perform tasks in SiteWorx/OS. The Calculation tab toolbar is shown above.

If the SiteWorx/OS window is too narrow to display all the toolbars, SiteWorx/OS will compact enough toolbars to allow the remaining toolbars to display. Compacting starts at the right side of the window. A compacted toolbar looks like this:

toolbar collapsed

Pressing the small button toolbar expand button at the bottom of the compacted toolbar will expand it.

toolbar expanded

To close the expansion, press the toolbar expand button button again.

The toolbars can be hidden by double clicking on the active tab. This increases the work area.

toolbars hidden

When the toolbars are hidden, clicking on the active tab once will drop the toolbar down.

toolbars dropped down

Notice that toolbar is covering part of the work area. Clicking on the tab again will hide the toolbar.

← PreviousTips and TechniquesNext →Troubleshooting
← All modules·Module overview: Troubleshooting & Tips·Take the Troubleshooting & Tips quiz (12 questions)
Vertigraph

Takeoff and estimating software for commercial contractors across the United States.

800.989.4243 · 214.340.9436
support@vertigraph.com
Products
  • BidScreen XL
  • SiteWorx/OS
  • Drawing Compare (add on)
  • Pricing
Support
  • FAQs
  • Training videos
  • Product documents
  • Contact
  • BidPoint XL (legacy)
Company
  • About
  • History
  • Blog
  • Testimonials
  • Partners
  • Students
© 2026 Vertigraph, Inc. All rights reserved.
TermsPrivacySitemap