Vertigraph Discussion Board

Message Index

Digitizers
Erich S. -- Tuesday, 10 April 2001, at 5:44 p.m.
2 messages -- Newest posted Wednesday, 11 April 2001, at 3:35 p.m.

ADMIN! Welcome to the Vertigraph Message Board
Moderator -- Wednesday, 11 April 2001, at 9:50 a.m.
1 message

Do I need Microsoft Excel?
Ken Bailey -- Wednesday, 11 April 2001, at 11:49 a.m.
2 messages -- Newest posted Wednesday, 11 April 2001, at 3:30 p.m.

Existing digitizer board (?)
Ken Bailey -- Wednesday, 11 April 2001, at 11:50 a.m.
2 messages -- Newest posted Wednesday, 11 April 2001, at 3:28 p.m.

Concrete Take off
Joe -- Tuesday, 6 November 2001, at 10:11 a.m.
2 messages -- Newest posted Tuesday, 6 November 2001, at 2:59 p.m.

BidPoint XL
Peter Kong -- Thursday, 17 January 2002, at 10:01 a.m.
2 messages -- Newest posted Thursday, 17 January 2002, at 11:49 a.m.

BidPoint XL
Peter Kong -- Thursday, 17 January 2002, at 10:05 a.m.
2 messages -- Newest posted Thursday, 17 January 2002, at 11:52 a.m.

RSMeans Database
Bill Rogers -- Thursday, 10 October 2002, at 8:04 p.m.
2 messages -- Newest posted Wednesday, 22 January 2003, at 12:54 p.m.

Site Works
Mike Allemandi -- Saturday, 17 January 2004, at 12:39 a.m.
1 message

Disabling puck as mouse
Dennis Pugil -- Sunday, 14 November 2004, at 3:38 p.m.
2 messages -- Newest posted Saturday, 10 December 2005, at 7:48 a.m.

Bidscreen XL
P. Coutou -- Monday, 20 December 2004, at 10:50 a.m.
2 messages -- Newest posted Wednesday, 22 December 2004, at 2:45 p.m.

World of Concrete
Dan Carothers -- Sunday, 23 January 2005, at 2:25 p.m.
1 message

Take-Off Estimator Needed
Britton Brown -- Thursday, 27 January 2005, at 6:00 p.m.
1 message

Using on a protected sheet
Keith -- Monday, 21 February 2005, at 12:31 a.m.
2 messages -- Newest posted Saturday, 10 December 2005, at 7:36 a.m.

demo
dave -- Thursday, 23 June 2005, at 5:45 p.m.
2 messages -- Newest posted Saturday, 6 May 2006, at 3:14 p.m.

anything less expensive
jody compton -- Tuesday, 28 June 2005, at 2:18 a.m.
2 messages -- Newest posted Saturday, 6 May 2006, at 3:10 p.m.

Thank you
Mike Luke -- Sunday, 24 July 2005, at 8:17 p.m.
1 message

clay liners
patrick mclemore -- Friday, 2 December 2005, at 5:19 p.m.
2 messages -- Newest posted Saturday, 6 May 2006, at 3:28 p.m.

Register Drawing
Dan -- Friday, 13 January 2006, at 3:52 p.m.
2 messages -- Newest posted Saturday, 6 May 2006, at 2:56 p.m.

Looking for Estimator
Roger McHenry -- Friday, 3 February 2006, at 10:57 a.m.
1 message

rs232 digitiser board
john harte -- Monday, 20 February 2006, at 8:40 a.m.
2 messages -- Newest posted Saturday, 6 May 2006, at 3:03 p.m.

Initial take off (Estimating)
Chyke -- Thursday, 2 March 2006, at 8:15 a.m.
2 messages -- Newest posted Saturday, 6 May 2006, at 3:22 p.m.

Digitizer Stylus
Fred Sauer -- Tuesday, 23 May 2006, at 10:25 a.m.
2 messages -- Newest posted Thursday, 10 August 2006, at 5:38 p.m.

Zoom-in Digitizing
Luis Villar -- Monday, 5 June 2006, at 11:55 a.m.
2 messages -- Newest posted Thursday, 21 September 2006, at 11:58 a.m.

hello
test -- Saturday, 12 August 2006, at 6:57 a.m.
1 message

hello
Hillary -- Saturday, 12 August 2006, at 7:37 a.m.
1 message

The evaluation period for this product has expired
Andre -- Tuesday, 5 September 2006, at 2:27 p.m.
2 messages -- Newest posted Thursday, 21 September 2006, at 11:50 a.m.

Office 2003
Dave -- Wednesday, 18 October 2006, at 11:44 a.m.
2 messages -- Newest posted Sunday, 17 December 2006, at 11:52 a.m.

Where to purchase Mouse/Puck/Stylus
JERRY -- Thursday, 28 December 2006, at 10:31 p.m.
2 messages -- Newest posted Friday, 29 December 2006, at 3:06 p.m.

Trench Take Off
David Hobson -- Monday, 12 March 2007, at 10:03 p.m.
2 messages -- Newest posted Tuesday, 13 March 2007, at 3:32 p.m.

Cut/Fill
David Hobson -- Friday, 16 March 2007, at 11:52 a.m.
2 messages -- Newest posted Friday, 16 March 2007, at 9:13 p.m.

Office 2007
Dean Whitehead -- Friday, 22 June 2007, at 10:35 a.m.
2 messages -- Newest posted Thursday, 28 June 2007, at 10:53 a.m.

Contour Lines in Siteworx
Matthew -- Tuesday, 24 July 2007, at 6:47 p.m.
4 messages -- Newest posted Friday, 27 July 2007, at 12:05 p.m.

runtime error
ajay jacob -- Sunday, 25 November 2007, at 9:55 p.m.
2 messages -- Newest posted Wednesday, 28 November 2007, at 11:18 a.m.

Printing Problems
Alan Kalb -- Tuesday, 15 January 2008, at 11:49 a.m.
3 messages -- Newest posted Thursday, 17 January 2008, at 2:14 p.m.

Siteworx/OS
Bud Nordman -- Sunday, 20 January 2008, at 4:55 p.m.
4 messages -- Newest posted Wednesday, 23 January 2008, at 1:14 a.m.

Stripping or Demolition
Bud Nordman -- Friday, 25 January 2008, at 11:06 a.m.
4 messages -- Newest posted Tuesday, 26 February 2008, at 7:06 p.m.

Trenches
Bud Nordman -- Friday, 8 February 2008, at 10:55 a.m.
5 messages -- Newest posted Wednesday, 13 February 2008, at 9:29 a.m.

change point elevations
Mark -- Wednesday, 27 February 2008, at 12:19 a.m.
2 messages -- Newest posted Wednesday, 27 February 2008, at 2:07 a.m.

Bidscreen XL Drawing Location
Erik -- Friday, 29 February 2008, at 5:39 p.m.
6 messages -- Newest posted Tuesday, 11 March 2008, at 10:16 p.m.

Siteworx/OS Design Line
Bud Nordman -- Wednesday, 30 April 2008, at 11:59 p.m.
3 messages -- Newest posted Thursday, 15 May 2008, at 10:01 a.m.

Error Message When Loading Document
Matthew Mangat -- Monday, 16 June 2008, at 1:12 p.m.
1 message

Digitizers
Eric Stickler -- Friday, 12 September 2008, at 6:39 p.m.
2 messages -- Newest posted Friday, 19 September 2008, at 2:58 p.m.

Acrobat 9
Joe Machek -- Tuesday, 16 September 2008, at 10:47 a.m.
2 messages -- Newest posted Sunday, 21 September 2008, at 4:55 p.m.

Vista
Paul Gleeson -- Tuesday, 23 September 2008, at 2:55 a.m.
2 messages -- Newest posted Tuesday, 23 September 2008, at 1:03 p.m.

mini take off tool
Kevin Smith -- Wednesday, 21 January 2009, at 2:17 a.m.
2 messages -- Newest posted Wednesday, 21 January 2009, at 7:43 p.m.

registering
Belinda -- Thursday, 22 January 2009, at 8:11 a.m.
2 messages -- Newest posted Sunday, 25 January 2009, at 8:13 p.m.

BidScreen
David Fragala -- Thursday, 5 February 2009, at 3:31 p.m.
2 messages -- Newest posted Wednesday, 11 February 2009, at 6:46 p.m.

trenches
Dan -- Friday, 13 February 2009, at 8:44 a.m.
2 messages -- Newest posted Friday, 13 February 2009, at 7:06 p.m.

Digitizing Slopes
David -- Wednesday, 29 April 2009, at 8:12 p.m.
2 messages -- Newest posted Thursday, 30 April 2009, at 11:36 a.m.

Scale Factor
Shad -- Thursday, 18 June 2009, at 11:59 a.m.
2 messages -- Newest posted Friday, 19 June 2009, at 11:53 a.m.

MAC
Eric -- Tuesday, 29 September 2009, at 10:05 p.m.
2 messages -- Newest posted Thursday, 1 October 2009, at 2:58 p.m.

Digitizer Board Orientation
David O'Hern -- Thursday, 1 October 2009, at 6:24 p.m.
2 messages -- Newest posted Friday, 2 October 2009, at 1:31 p.m.

resetting scale
mark miller -- Wednesday, 6 January 2010, at 6:02 p.m.
2 messages -- Newest posted Friday, 15 January 2010, at 3:15 p.m.

Excel 2007
Ed -- Sunday, 7 March 2010, at 6:06 p.m.
2 messages -- Newest posted Monday, 15 March 2010, at 11:39 a.m.

Great programs
Daniel Zeman -- Wednesday, 14 April 2010, at 10:44 p.m.
2 messages -- Newest posted Friday, 16 April 2010, at 12:56 p.m.